Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Strange GLM AutoCal Problem

mikaelpersson, muokattu 11 Vuodet sitten.

Strange GLM AutoCal Problem

Youngling Viestejä: 3 Liittymispäivä: 29.4.2011 Viimeisimmät viestit
Hello Forum

I just installed my system and i have a strange problem when using AutoCal. The speaker network is online and working properly during the initial GLM setup procedure, and the autocal setup accepts my mic-serial number. However when i press the "p" to start the calibration the text "input calibration" shows then nothing more. After waiting for several minutes a popup window informs me that i lost connection to the network.

i downloaded the newest version of GLM, did several Reboots, used different USB ports etc. The problem persists.

Anyone else had the same problem and solved it ?
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Strange GLM AutoCal Problem

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello Mikael,

Are you using PC or Mac? Which operating system?
mikaelpersson, muokattu 11 Vuodet sitten.

Re: Strange GLM AutoCal Problem

Youngling Viestejä: 3 Liittymispäivä: 29.4.2011 Viimeisimmät viestit
Hey

I'm on a Mac, Leopard 10.5.8

Havnt updated my macbook to snowleopard yet ? Dod you think i have to do this in order to get GLM to work propely ?
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Strange GLM AutoCal Problem

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
mikaelpersson, muokattu 11 Vuodet sitten.

Re: Strange GLM AutoCal Problem

Youngling Viestejä: 3 Liittymispäivä: 29.4.2011 Viimeisimmät viestit
Been abroad for a while but back in the studio and ready to try to get this system working.

Followed all the steps in the thread but the calibration still does not work. Seems like the CoreAudio driver crashes during the calibration procedure. Sometimes the network gets lost during calibration as well.

Will keep on working on this problem but could really use some suggestions on what to do.
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Strange GLM AutoCal Problem

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

1. Can you manually delete DSP folder from the ~/Library/Application Support/Genelec (user's home library). This assures that the needed parts are definitely updated. Of course you should update to v1.4.1 after this.
2. Can you check which version of the X11 you have? You can find it from /Applications/Utilities, and you can see its version by pushing Control + click X11 icon and select Get Into.