Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Flush mounting the 8000 series.

nickh, muokattu 11 Vuodet sitten.

Flush mounting the 8000 series.

Youngling Viestejä: 7 Liittymispäivä: 3.2.2011 Viimeisimmät viestit
Can the 8000 series be flush mounted into a cabinet? The Setup Guide & User manual does not specifically say so.

Will the bass tilt switch be enough to counter the bass loading effect since the bass reflex port is at the back (in comparison with the HT series)?
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Flush mounting the 8000 series.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Nick,

Yes, the 8000 series can be flush mounted, but a special box needs to be used. See our accessories catalogue, page 10: http://www.genelec.fi/documents/catalogues/Genelec_Accessories_brochure.pdf