Table stands for 8020B

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

yaschan, muokattu 12 Vuodet sitten.

Table stands for 8020B

Youngling Viestejä: 23 Liittymispäivä: 24.6.2010 Viimeisimmät viestit

I am considering to buy a pair of 8020B for near-field monitoring. I intend to place the speakers on my desk, either side of my 26inch monitor.
I would like to ask recommendation for a stand. Could mic stands be used? I wonder if they are sturdy enough.
I would like to place them on a higher level than the Iso-Pods would allow.

By the way, is Iso-Pod included in the 8020B box?

ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Table stands for 8020B

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Hello,

I can recommend two options. The other one can be seen in our accessories catalogue, page 3, product code 8000-406. Also remember to get the stand plate, product code 8020-408.

The other one is an L shaped stand (the design will allow around 30 degree upwards tilt), similar to these (those are for 6010A). The tweeter's distance from the table will be around 30 cm with those stands. Product codes are 8020-320B (black) and 8020-320W (white).

bluedoor, muokattu 12 Vuodet sitten.

Re: Table stands for 8020B

Youngling Viestejä: 4 Liittymispäivä: 19.8.2011 Viimeisimmät viestit

Hi,

Can you tell me where can i buy the table-stand L-shape for the 8020b?
Thank you.

ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Table stands for 8020B

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Hi,

Can you tell me where can i buy the table-stand L-shape for the 8020b?
Thank you.

Hi,

if you live within EU, directly from our Webshop. If not, from your local dealer.

bluedoor, muokattu 12 Vuodet sitten.

Re: Table stands for 8020B

Youngling Viestejä: 4 Liittymispäivä: 19.8.2011 Viimeisimmät viestit

Thanks for the reply.
But...90€ for each stand?? WoW! They must be outstanding!

bluedoor, muokattu 11 Vuodet sitten.

Re: Table stands for 8020B

Youngling Viestejä: 4 Liittymispäivä: 19.8.2011 Viimeisimmät viestit

In your web shop page the only stands available are the table stands?

Where's the products you recommended to the user above?

" product code 8000-406. Also remember to get the stand plate, product code 8020-408."

Thank you.

ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Table stands for 8020B

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

In your web shop page the only stands available are the table stands?

Yes, at the moment we offer only those.

Where's the products you recommended to the user above?

" product code 8000-406. Also remember to get the stand plate, product code 8020-408."

Thank you.

You can order any of your products through our official dealers. Where are you located at?

http://www.genelec.com/sales-network/