Digital Surround processor with Genelec 5.1 DSP system

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

bane, muokattu 12 Vuodet sitten.

Digital Surround processor with Genelec 5.1 DSP system

Padawan Viestejä: 40 Liittymispäivä: 11.6.2009 Viimeisimmät viestit

I'm intended to make 5.1 or 7.1 Genelec DSP:SE setup with Apogee Symphony I/O with 8 AES in/out card installed and some digital surround processor having 8 AES in/out. Do you have any suggestions what processor will suite my needs?

andreas, muokattu 12 Vuodet sitten.

Re: Digital Surround processor with Genelec 5.1 DSP system

Padawan Viestejä: 61 Liittymispäivä: 8.4.2009 Viimeisimmät viestit

Hi Bane,

availability of SSPs with 8 Channel S/PDIF or AES/EBU out are rather still non existing (copy protection). Try to google on TACT or Meridian. I do use two Meridian processors with 5x 8240a, one connected via S/PDIF to all dsp speakers, one via analog, limited to PCM 24Bit/48KHz and DD as well as DTS core.