Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Audio Interface for DSP systems

weitbrecht79, muokattu 11 Vuodet sitten.

Audio Interface for DSP systems

Youngling Viestejä: 5 Liittymispäivä: 1.12.2010 Viimeisimmät viestit

I am just about to buy me a pair of 8250s.
My current setup with 8040s is completely analog, so I want to buy a new Audio Interface as well in order to have a fully digital setup, using AES/EBU to get audio to the loudspeakers. The problem is, I have a 27" iMac, so I can't use PCI-E soundcards, I have to buy either a USB or a Firewire soundcard - now you find AES/EBU ports only in the upper price section (RME for example hast it only in the Fireface UFX).
I don't mind spending more money for an audio interface, but I just want to be sure it's worth the penny.

Now I would be grateful for some help, I read through the threads here but I am still a bit confused..

1.) Will there be a difference in sound quality if I use a soundcard that has only S/PDIF outputs, putting a S/PDIF to AES/EBU converter after it or is it absolutely the same?

2.) Do audio interfaces vary in quality as far as the digital audio signal is concerned? I understand that Jitter affects sound quality and mostly occurs during the D/A-process, but can this happen within the digital chain as well?
Some people say there's no difference as long as the audio interface just delivers a digital signal and does not convert to analog.
Are there any recommendations for audio interfaces connected to a Genelec DSP system?

Thanks a lot!
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: Audio Interface for DSP systems

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Philipp,

1. Please see this: viewtopic.php?f=4&t=59

2. I would say there is no clear audible difference.