Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


8030A LED brightness and sound volume?

apirttimaki, muokattu 12 Vuodet sitten.

8030A LED brightness and sound volume?

Youngling Viestejä: 5 Liittymispäivä: 1.4.2009 Viimeisimmät viestit
I have two 8030A's and a 7050B sub. In one of my 8030's the green front panel LED is slightly more dim than in the other similar speaker. I also have to keep it a bit "louder" (position of volume controller) than the other one with the brighter LED. I also believe that the brighter one sounds a bit more clear, too...

Therefore, I would like to ask, could there be something wrong with the speaker that maybe should be repaired, and what that might be? Is it possible that LED brightness might indicate any electrical problems? Or is there any reason why there should not be causality between the LED brightness and sound volume?

Thanks a lot!
ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: 8030A LED brightness and sound volume?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

There shouldn't be any causality between the LED brightness and sound volume. It's quite normal for LED's to have some variation between them.

Does the volume difference go away if you turn the gain pots all the way up? Potentiometers are usually best to keep at max setting for best accuracy.

Have you tried switching the speakers with each other? Any difference wtr to the volume problem?