Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

discrete sub send to 7270A

marekb, muokattu 13 Vuodet sitten.

discrete sub send to 7270A

Youngling Viestejä: 2 Liittymispäivä: 16.3.2010 Viimeisimmät viestit
Any idea how we can receive a discrete signal to our 7270A subs within the GLM environment?

The 7270A's have a connection for a discrete input but GLM doesn't seem to allow its use i.e. the satellite speakers are bass managed which is fine but we would like to receive and hear the sub in isolation for an ambiosonic project
ilkka-rissanen, muokattu 13 Vuodet sitten.

Re: discrete sub send to 7270A

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Just one clarifying question first: do you mean that would like to mute the satellite channels and play the subwoofer only?
marekb, muokattu 13 Vuodet sitten.

Re: discrete sub send to 7270A

Youngling Viestejä: 2 Liittymispäivä: 16.3.2010 Viimeisimmät viestit
Hi

For example We would like to be able to turn down the volume to our satellite speakers and have the sub levels controlled individually for our audio experiments. There would be some occasions when we want to only hear the subs.When you kindly supplied us with the custom version of GLM for our 24/4 setup here at Huddersfield ( v.1.2.0 ) we could do this but the commercial version does not allow an isolated sub signal to be received by the sub, even though we have the separate connection in place.
I installed v.1.3.1 because this lets us store a global attenuation to all speakers.
ilkka-rissanen, muokattu 13 Vuodet sitten.

Re: discrete sub send to 7270A

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

I have forwarded your message to our GLM developers. I will let you know their answer as soon as possibly.
ilkka-rissanen, muokattu 13 Vuodet sitten.

Re: discrete sub send to 7270A

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

Our GLM developers will contact you directly!