Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Are 6010s equiped with full protection?

dumbo, muokattu 12 Vuodet sitten.

Are 6010s equiped with full protection?

Padawan Viestejä: 78 Liittymispäivä: 20.12.2009 Viimeisimmät viestit
I had some Mogami RCA cables custom made and the Cardas plugs I used don't have strain protection so they have shorted a couple of times. The last couple of times I've flipped over my 5040 sub to make some adjustments one of the cables has shorted causing a nasty hum in one of the 6010s. The 6010s sound like they survived unscathed. Do they have protection circuitry to guard against this kind of mishap or did I just get lucky?
ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Are 6010s equiped with full protection?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
There is no dedicated protection circuit for that kind of mishap, but naturally the design itself has many protective features against all sorts of "user errors". :)

Of course it's always recommended to power down the units (speakers and subs) when plugging or unplugging the signal cables to prevent any possible damage.
dumbo, muokattu 12 Vuodet sitten.

Re: Are 6010s equiped with full protection?

Padawan Viestejä: 78 Liittymispäivä: 20.12.2009 Viimeisimmät viestit
So wound damage from that kind of mishap be obvious or might it be subtle and cumulative?
Ps. I wasn't actually changing connections (it's obvious that one should power down for that). I just turned the sub over to set the phase and the twisting of the cables caused a short.
ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Are 6010s equiped with full protection?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Don't worry, it would be instant and very obvious!
dumbo, muokattu 12 Vuodet sitten.

Re: Are 6010s equiped with full protection?

Padawan Viestejä: 78 Liittymispäivä: 20.12.2009 Viimeisimmät viestit
Thanx,
It's actually quite surprising how much of the 8240/7260's performance that the tiny 6010/5040s are able to achieve. I wouldn't be without either system, but if I was a struggling student the 6010/5040 system would definitely be the way to go (I wished I had known this when I was poor) :^)