Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Bass tilt switches on 8040 A

bulldogspacer, muokattu 13 Vuodet sitten.

Bass tilt switches on 8040 A

Youngling Viestejä: 2 Liittymispäivä: 2.5.2010 Viimeisimmät viestit
Hello
i got 8040.
On the second switches group from the left. It offers 3 attenuation levels, -2,-4 and -6 dB.
I saw in the quick set up guide that the 3rd one from the left is the -4 dB.
Does it mean that the 2nd one is the -2db and the 4th one is the -6?
Ok but what is the first one? Nothing?
Thank you for answer because this question realy obsess me...

and sorry for my english!!!
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: Bass tilt switches on 8040 A

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

Attached is the DIP switch settings of the 8040A/8050A. Hope it helps!

Liitteet:

bulldogspacer, muokattu 13 Vuodet sitten.

Re: Bass tilt switches on 8040 A

Youngling Viestejä: 2 Liittymispäivä: 2.5.2010 Viimeisimmät viestit
Thanks a lot!!!

Right now I just had to use -4 dB and it s just perfect!!
But with your answer, Now I Know!!!