Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

weird setup....???(3x8030,2x8020,7050)

kristof, muokattu 12 Vuodet sitten.

weird setup....???(3x8030,2x8020,7050)

Youngling Viestejä: 1 Liittymispäivä: 31.10.2009 Viimeisimmät viestit
Hello,

I have one question,, what if i use 3x 8030A and 2x8020A with 7050B subwoofer for a 5.1 setup, and reduce the gain for the 3x8030A to match the overall setup and db output of the 8020A and 7050B...
Can i have a could (flat) responce because i want to use this setup primarly for 2.1 monitoring rather 5.1 and i dont want to spend the extra money for something less important for me.

Thanks a lot!!!!
christophe-anet, muokattu 12 Vuodet sitten.

Re: weird setup....???(3x8030,2x8020,7050)

Jedi Knight Viestejä: 188 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

Thanks for your post. You are perfectly right - you can indeed use the setup you describe. Both 8030A's and 8020B's have the same sensitivity at max gain setting (-6 dBu for 100 dB at 1m), however, the 8030A's maximum SPL is higher than the one of the 8020B. So, the complete 5.1 system will peak when the max. SPL is reached with the 8020B's.

You can certainly achieve a flat response with such a system, making sure that each loudspeaker is properly calibrated in relation to its acoustic surrounding.

Happy monitoring!
Best regards,