Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8260A info

timh, muokattu 12 Vuodet sitten.

8260A info

Youngling Viestejä: 2 Liittymispäivä: 3.10.2009 Viimeisimmät viestit
I'm very interested in the new 8260A and I've read the information on your site. I was hoping you could tell us more about a) the amplifiers in the monitor and b) the D/A converter part of the system. Can the D/A handle 192 khz digital input well? Also, I was wondering if you can provide the cumulative spectral decay plots for the 8260A. It looks like a great product!

Thank you.
christophe-anet, muokattu 12 Vuodet sitten.

Re: 8260A info

Jedi Knight Viestejä: 188 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

Thanks for your post. Some comments here on your technical questions about our new 8260A.

The ADC works at 96 kHz sampling frequency. The AES/EBU digital audio input works at any sampling frequency between 32 kHz and 192 kHz. The 8260A can handle 192 kHz digital input.

The audio bandwidth input-to-output of the 8260A is from 26 Hz (-3 dB point) to about 40 kHz (-3 dB point). The power amplifiers are AB class power amplifiers.

As of today, we do not generally publish cumulative spectral decay plots (CSD) for our products. However, if we decide to do so, such plots will be featured in our technical product documentations.

Hope this is helpful.
Best regards,
timh, muokattu 12 Vuodet sitten.

Re: 8260A info

Youngling Viestejä: 2 Liittymispäivä: 3.10.2009 Viimeisimmät viestit
Thank you for the answers. To follow up, I am interested in the impulse response of the new 8260A's, which is why I was asking about the cumulative spectral decay plots. To me, these seem important in evaluating top of the line speakers. Can you comment?

Thanks!
underwheels, muokattu 10 Vuodet sitten.

Re: 8260A info

Youngling Viestejä: 13 Liittymispäivä: 15.12.2011 Viimeisimmät viestit
Hi!
Can the 8260A work with analog signal without A-D-A conversion and DSP processing function?
Thanks!
ilkka-rissanen, muokattu 10 Vuodet sitten.

Re: 8260A info

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi!
Can the 8260A work with analog signal without A-D-A conversion and DSP processing function?
Thanks!

Hi!

Short answer is no. DSP processing inherently requires a digital signal, as similarly amplifiers require an analog signal.
underwheels, muokattu 10 Vuodet sitten.

Re: 8260A info

Youngling Viestejä: 13 Liittymispäivä: 15.12.2011 Viimeisimmät viestit
Hi!
Can the 8260A work with analog signal without A-D-A conversion and DSP processing function?
Thanks!

Hi!

Short answer is no. DSP processing inherently requires a digital signal, as similarly amplifiers require an analog signal.

I mean "work without DSP and ADA conversion" - like analog 80xx series monitors :?:
underwheels, muokattu 10 Vuodet sitten.

Re: 8260A info

Youngling Viestejä: 13 Liittymispäivä: 15.12.2011 Viimeisimmät viestit
??????? :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?
1038, muokattu 10 Vuodet sitten.

Re: 8260A info

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Hi Underwheels,

Illka has already told you no.

The analog input is converted to digital, there is no way around this.
underwheels, muokattu 10 Vuodet sitten.

Re: 8260A info

Youngling Viestejä: 13 Liittymispäivä: 15.12.2011 Viimeisimmät viestit
Hi Underwheels,

Illka has already told you no.

The analog input is converted to digital, there is no way around this.

Thanks!
waiting for 8060A :roll:
1038, muokattu 10 Vuodet sitten.

Re: 8260A info

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
I would suggest that you audition the 8260A, the benefits that in-room eq provides far outweighs the "extra AD conversion"

If you can find a dealer with both 8050/8040 and 8250/8040 have a listen, i'm sure you will see the benefits of the DSP immediately.