Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Receiver / Dolby Digital decoder to pair with Genelecs

sthubbar, muokattu 12 Vuodet sitten.

Receiver / Dolby Digital decoder to pair with Genelecs

Youngling Viestejä: 3 Liittymispäivä: 18.6.2009 Viimeisimmät viestit
In a previous post, it was suggested to maybe purchase a receiver to pair with my 8030a's. Don't most home theater receivers come with built in amps? Does that cause any issues with pairing with the 8030's?

I currently have 3 sources that all have optical digital outputs. Any recommendations for receivers? Maybe with 3 optical digital inputs, XLR connectors are optional.
ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Receiver / Dolby Digital decoder to pair with Genelecs

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Yes, most AV receivers do come with built-in amplifiers unless they are only pre amplifiers/processors. If you want to use this kind of device with active speakers, it needs to have pre amplifier outputs from which you can connected the signal to the active speakers. That way you will bypass the built-in amplifiers and use the ones in the active speakers instead.

Usually the most affordable AV receivers don't have preamp outputs so you will have to look at the mid or the upper end of the product ranges.

Here's a list of the most affordable AV receivers from each manufacturer having 7.1 preamp outputs.

Cambridge Audio Azur 650R
Denon AVR-2310
Harman/Kardon AVR 260
Marantz SR5004
Onkyo TX-SR707
Pioneer VSX-LX52
Sony STR-DA2400ES
Yamaha RX-V765
lukester, muokattu 12 Vuodet sitten.

Re: Receiver / Dolby Digital decoder to pair with Genelecs

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit
I've been facing the same problem without ever finding a solution.

I've been trying to talk well-to-do friends of mine into a pair of living-room 1037C's (100m^2 room), only need stereo.

best solution i've found was the cheapest NAD preamp for 750€, but the abyssmal signal to noise ratio of 98db kinda threw me off. a rane rack mixer would give me better sound for less cash sans a remote control.
in another session also i compared a 1000€ nad sacd player in cd mode to my Rme Soundcard and i probably don't have to tell you who kicked whose behind.

Gist of the story is, I've got 2 people i'd like to sort out with the awesome genelec sound and sacd/blu ray audio resolution (no digital output here, just what are those people thinking?), but the hi-fi world is doing anything it can to make this impossible.

in a studio i can get perfect stereo for like 1200€ (rane mixer, cheap cd player, rme ad changeover)
in hi-fi something close to this quality seems to be 3 grand, any ideas?