Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Genelec Servicing UK

andyb, muokattu 13 Vuodet sitten.

Genelec Servicing UK

Youngling Viestejä: 1 Liittymispäivä: 28.4.2009 Viimeisimmät viestit
Hi there.

My beloved 1029a + 1091a setup has taken a bit of a set back. One of the 1029a's has started to rattle when bass frequencies below 100hz are played through it. The other speaker does not encounter this problem so I know it is nothing to do with the mix. I tried everything else, swapping audio and power cables, panning left to right etc.

I can stop most of the rattling by applying pressure against the metal gauze on the outside so this sounds like it is something that could be fixed quickly. The speakers are getting on a bit as they are coming up for their 7th birthday but they have been looked after extremely well.

Can anyone advise of a quick fix that I could perform or point me in the direction of trusted company that could help. I am based in UK, Kent however London is very close.

Many thanks

christophe-anet, muokattu 13 Vuodet sitten.

Re: Genelec Servicing UK

Jedi Knight Viestejä: 188 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Dear Andrew,

Thanks for your message. As mentioned in our Forum header, service questions should be sent directly to our distributor's service centers for fast and efficient handling.

Please consult the following link for the contact details of our distribution and service centers network:

Best regards,