Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Adjustment of 8020Ds

marve, muokattu 4 Vuodet sitten.

Adjustment of 8020Ds

Youngling Viestejä: 1 Liittymispäivä: 31.7.2017 Viimeisimmät viestit



Just got a pair of Genelec 8020Ds. They sit on a desktop on each side of my computer screen, 80cm between the monitors. The desktop itself is also 80cm in depth. However, the monitors are placed around 13cm from a plaster wall. I believe my distance to the monitors is 1m or so.

I have already activated -2dB bass tilt. Should go for -4dB? Should I also activate the desktop switch in this case?

jani-oksanen, muokattu 4 Vuodet sitten.

RE: Adjustment of 8020Ds

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hi Marve,

It is hard to estimate the correct DIP-positions without listening as it varies depending of the room. Could you send us picture of your setup to and we will guide you something you can try and compare. Thank you!

Best Regards,
Jani Oksanen
Factory Service Team