Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

SAM Reference Mic

gfpcj, muokattu 4 Vuodet sitten.

SAM Reference Mic

Youngling Viestejä: 8 Liittymispäivä: 7.1.2017 Viimeisimmät viestit

Hi,

Is it possible to use the GLM microphone on it's own without the GLM software? I'd like to use it with other measurement software. 

I would like to measure the room acoustics without doing any calibration of the monitors so I can try and treat my room first and then smooth out any final issues with auto-cal.

Thanks,

markus-kahelin, muokattu 4 Vuodet sitten.

RE: SAM Reference Mic

Jedi Knight Viestejä: 109 Liittymispäivä: 16.3.2010 Viimeisimmät viestit

Hello!

The GLM microphone has been designed to be used with the GLM interface only and we don't recommend using it with any 3rd party hardware. For that reason we don't publish any technical details of the microphone. The GLM software has a built in system to have the measurement calibrated always to the specific microphone used, based on the serial number. So the accuracy of the measurement is only valid when used with GLM.

 

Best Regards, Markus

Genelec Support Team