Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Home Studio Monitoring Advice

fandusss, muokattu 4 Vuodet sitten.

Home Studio Monitoring Advice

Youngling Viestejä: 1 Liittymispäivä: 11.10.2017 Viimeisimmät viestit

Hi guys,
 

I have moved my mixing room to my home, and the room is roughly 31 cubic metres. (2.7m W x 4.7m L x 2.4m H).

I have EVENT OPALS and they feel like they might be too much for the small space. No matter how I place my equilateral triangle in the room, I can't get away from having big 15-25db nulls in the 60-100hz range. I already have the space quite heavily treated. Measuring one speaker at a time, I can find placements that yield a quite flat response below 100hz, But never in stereo.

This leads me to consider getting smaller speakers with a sub, so I can position the sub to get the desired bass response, and then have the stereo monitors positioned accordingly. 

Am I thinking the right thing?

Which genelec combo would you all reccomend for a room this size? perhaps 8020/8030 with a 7050? 

Thanks in advance!

Andrew.

jani-oksanen, muokattu 4 Vuodet sitten.

RE: Home Studio Monitoring Advice

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hi Andrew,

If you have trouble with the room acoustics, I would recommend you 8320A or 8330A with 7350A subwoofer. The benefits of these models vs 8020/8030/7050 is that you can calibrate them with GLM software so your monitors will adapt to your room.

You can find more information about GLM from link below:
https://www.genelec.com/studio-monitors/glm-2-software

Best Regards,
Jani Oksanen
Factory Service Team