iMac stereo channel delay?

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

mtk, muokattu 5 Vuodet sitten.

iMac stereo channel delay?

Youngling Viestejä: 1 Liittymispäivä: 8.11.2017 Viimeisimmät viestit

Hello

We’re building an asymmetrical stereo setup with three G1:s. We are two people working with computers and three G1:s is a perfect solution for our needs.

The thing is that the side speakers (right channels) are closer to the listening spots than the one in the middle.
I would like to have a simple delay (0,6 ms) for the right channel, but I haven’t found out any good plug-ins for my 2017 iMac so far. Does any of you guys have any ideas?

Thanks!