Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

7060B with 1030A?

clearsignal, muokattu 4 Vuodet sitten.

7060B with 1030A?

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit

Hello…

I have a pair of 1030A. Still in love after all these years :)

 

I’m looking to add a Genelec subwoofer for a more rewarding experience. From other threads, I’m well aware the 7040 and 7050 aren’t up to the task, but the 7060A certainly is.

Unfortunately, I can only get the 7060B here in Thailand.

 

Will that be a good match?

 

My intention is to connect my DAP to the subwoofer with a left/right XLR cable, and from there run a cable to each monitor.

 

Thanks!!

1038, muokattu 4 Vuodet sitten.

RE: 7060B with 1030A?

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit

Get the 7360, you'll never regret it.

The SAM subwoofers will integrate into your space far better than non SAM, genelec have great guids on how to mix and match legacy monitors with the new subs. SAM will cost a bit more and you'll also have to purchase GLM, but it is money well spent.

Cheers

Steve

clearsignal, muokattu 4 Vuodet sitten.

RE: 7060B with 1030A?

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit
 

Get the 7360, you'll never regret it.

The SAM subwoofers will integrate into your space far better than non SAM, genelec have great guids on how to mix and match legacy monitors with the new subs. SAM will cost a bit more and you'll also have to purchase GLM, but it is money well spent.

Cheers

Steve

Thanks for the quick reply, amigo. Much obliged.

 

Still, the question stil standing: can I successfully use the 7060B?

I read around the 7060A would work just find. Not certain about the B.

 

(I must ask: the 7050 won’t work , willl it? I think the bass roll-off is a bit off – excuse the pan :))

 

Yeah, I looked up that guide, “SAM Series Compatibility & Operations (July 2015)” but to word in reference to the 1030A…

 

 

 


 
1038, muokattu 4 Vuodet sitten.

RE: 7060B with 1030A?

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit

It is all explained in the owners manual, yes you can use a 7060B if you can find one...

If you can't find one, a 7360 would be a far better solution and will work correctly with your 1030's

The compatibility comes down to Bass Management and having the system crossover correctly.

Cheers

Steve

clearsignal, muokattu 4 Vuodet sitten.

RE: 7060B with 1030A?

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit
 

It is all explained in the owners manual, yes you can use a 7060B if you can find one...

If you can't find one, a 7360 would be a far better solution and will work correctly with your 1030's

The compatibility comes down to Bass Management and having the system crossover correctly.

Cheers

Steve



Many thanks. I'll try to source out the 7360.
clearsignal, muokattu 4 Vuodet sitten.

RE: 7060B with 1030A?

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit

Now I have a question that will make you split your ribs in laugher...A testimony to my limited experience and knowledge:

 

To which ports do I connect my source on the subwoofers? I have a DAP with a 2-run cable (left and right sides), terminated with male XLR. Currently, I stick each end into a monitor.

 

I can’t upload images, so here are the links to the 2 subs. There are close-up photos of the rearside on each page:

https://www.genelec.com/studio-monitors/sam-studio-subwoofers/7360a-sam-studio-subwoofer

 

https://www.genelec.com/studio-monitors/7000-series-studio-subwoofers/7060b-studio-subwoofer

 

Thanks (with a bashful smile)

*** Edit ***

I dug the relevnant documenation. Thanks for all.