Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Connecting 8330A with S/PDIF from Steinberg UR28M

voyagr, muokattu 4 Vuodet sitten.

Connecting 8330A with S/PDIF from Steinberg UR28M

Youngling Viestejä: 1 Liittymispäivä: 6.4.2018 Viimeisimmät viestit

Hello everyone!

I am not sure if this is the right category to ask such a question, but I hope for your understanding.

Before getting into it, I would like to mention that my knowledge in music production is quite limited to music production itself.

In the other word, I don't have much of engineering knowledge of it. YES I'm a noob cheeky

 

I just bought a pair of new Genelec 8330A's with the GLM 2.0 User kit, and am kinda stuck with some struggles with cabling and connection.

My audio interface is UR28M from Steinberg, and I've been using it for over 5 years and never had a problem. (and ofc I absolutely love it!).

Just because I've only been using it with the analog connection, I never knew that it had a digital I/O (S/PDIF), and I just found it out as I was looking into using my new Genelec 8330A with the Digital I/O.

 

The Digital I/O of Genelec 8330A seems to only support the AES/EBU connection, which I suppose doesn't work with the S/PDIF of my Steinberg UR28M, and I found out there is a converter that converts AES/EBU to S/PDIF without any loss of audio quailty as I was scrapping through the internet. I just want to confirm if that is actually it, as well as what kind of converter that I can expect to look up simply because I don't have any knowledge about it.

 

btw, is it normal to have hissing noises (white/pink noise) when connected to analog on the 8330A?

 

manutal, muokattu 4 Vuodet sitten.

RE: Connecting 8330A with S/PDIF from Steinberg UR28M

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit

Yes, there are different AES/EBU to S/PDIF converters to be found. I bet they work just fine.

The hissing or the small white noice can be heared up to 1m from the speakers(depending on model, hearing & other back noices), nothing to worry about, its the same with the digital domain, doesnt chop though like the analog hissing does at times when getting some outer signal disturbanses.

mana, muokattu 4 Vuodet sitten.

RE: Connecting 8330A with S/PDIF from Steinberg UR28M

Youngling Viestejä: 6 Liittymispäivä: 3.5.2009 Viimeisimmät viestit

Should work but it seems in a pass through mode of sorts > https://www.steinberg.net/forums/viewtopic.php?t=72942

I run my 8330As digital via a Focusrite LS56, the only thing that I needed (in addition to proper cabling) was an impedance transformer to get it up to spec (from 75 Ω -> 110 Ω) and to allow for longer cable runs etc.

I use this one > http://www.neutrik.com/en/accessories/aes/ebu-impedance-transformers/naditbnc-m

You also need a short coaxial cable to connect that transformer to the interface.

Anyhoo... really happy with the results I am getting from my 8330A via digital.