Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8020b Port noisef

anatoly, modified 5 Years ago.

8020b Port noisef

Youngling Posts: 1 Join Date: 7/26/18 Recent Posts
Hello! i just purchased a second hand pair of Genelec 8020 and one of them is having a port noise. when i run a sine generator, around 50, one is just deep low end, and the other is flubby and when i put my hand against it i can feel the air not being consistent and making noise even more. is this a woofer going bad?
jani-oksanen, modified 5 Years ago.

RE: 8020b Port noisef

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello!

I'm sorry to hear about the noise. The problem may also be on the reflex port itself. It would be needed to have this monitor checked on our authorized service. Please contact your nearest distributor. You can find them from link below:

https://www.genelec.com/where-buy

Best Regards,
Jani Oksanen
Customer Support Team