Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

More delay required

jamesnz, modified 4 Years ago.

More delay required

Youngling Posts: 1 Join Date: 7/24/17 Recent Posts

Running a pair of 8351s with GLM2 as my main audio system.

Sometimes used to play DVDs/stream - need to delay the Genelecs a little more than the current software allows

Like they are the sound arrives a fraction before a stick hits a drum

Any ideas?

jani-oksanen, modified 4 Years ago.

RE: More delay required

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello, and sorry for late reply!

8351A maxium delay is 85ms, and if it is not enough, it is usually possible to do sync on the sound source, as example from the pre-amplifier. Have you checked the settings from your pre-amplifier or sound source?

 

Best Regards,
Jani Oksanen
Customer Support