Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

How to select the 7350 input with 9310A?

meng, modified 4 Years ago.

How to select the 7350 input with 9310A?

Padawan Posts: 27 Join Date: 12/17/15 Recent Posts

The PCM digital signal 4A is for center speaker.

4B is for sub and I select the 4B input in GLM 9310A setting. I connect the 9310A sub output to 7350 input, how to select the channel in GLM 7350 input? Both A & B, or B only?

Thanks.

jani-oksanen, modified 4 Years ago.

RE: How to select the 7350 input with 9310A?

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi Meng,

 

Sorry for late reply. It is needed to select both A&B.


Best Regards,
Jani Oksanen
Customer Support Team

meng, modified 4 Years ago.

RE: How to select the 7350 input with 9310A?

Padawan Posts: 27 Join Date: 12/17/15 Recent Posts

Thanks.

And how to select the 7350 LEF input with 9310A? I remember that I can't select BOTH A and B.

When I want to totally believe the 9310A to do the bass management, should I change the setting of the subwoofer crossover frequency of my pre-Amplifer (meridian 568.2mm) , for example, change the subwoofer crossover frequency to 30hz (can't be closed).