Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

G3 led problem

elvisoffinland, modified 3 Years ago.

G3 led problem

Youngling Posts: 2 Join Date: 11/29/13 Recent Posts

Moi!

I have a pair of G3 with 7060B sub.. now I noticed that the other G3s led is blinking and it stays off long periods (~2-5min) and starts to blink again. While blinking its not that bright as the other speakers led is while it stays on all the time.. should I be worried? I bought these 2014..

Pitäsikö olla huolissaan? Onko hajoamassa tai jotain? Takuu on kai vielä voimassa..?

-Antti

 

jani-oksanen, modified 3 Years ago.

RE: G3 led problem

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi Antti,

Please contact us directly through service enquiry form in order to have this problem fixed. You can find a link below:

https://www.genelec.com/service-enquiry-form


Best Regards,
Jani Oksanen
Customer Support Team