Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec G + GLM kit

ghabit, modified 3 Years ago.

Genelec G + GLM kit

Youngling Posts: 6 Join Date: 4/27/18 Recent Posts

Hello!

I like so much 8340 monitors and i'd like to you them as home acoustic system, BUT.

Green LED isn't looking actually good at home, so G4 look very good, but big advantage of 8340 - automatical calibration is unavailable for G4 acoustic system. Is there some way to solve that? Thank you.

jani-oksanen, modified 3 Years ago.

RE: Genelec G + GLM kit

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello,

8340A is only available with green LED, but if you do not like the color of LED, you can turn the LED to OFF from GLM settings.

Unfortunately it is not possible to change the LED color.

Best Regards,
Jani Oksanen
Customer Support Team

costakis, modified 3 Years ago.

RE: Genelec G + GLM kit

Padawan Posts: 76 Join Date: 2/13/19 Recent Posts
ghabit:

Hello!

I like so much 8340 monitors and i'd like to you them as home acoustic system, BUT.

Green LED isn't looking actually good at home, so G4 look very good, but big advantage of 8340 - automatical calibration is unavailable for G4 acoustic system. Is there some way to solve that? Thank you.

Why don't you use a tape to dim the green LED?

Costakis