Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

7050b footswitch

blackwater, modified 3 Years ago.

7050b footswitch

Youngling Posts: 0 Join Date: 3/19/19 Recent Posts

Hi folks,

Then I was buying Genelec`s, there was no ISS system on the sub.

I`m thinking if I would make by myself a foot turn on/off switch for turning off a sub from power outlet does I damage a sub or the power switch on a sub makes the same job?

Thank you in advance.

King regards,


jani-oksanen, modified 3 Years ago.

RE: 7050b footswitch

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi Mantas,

You can use as example extension cord that has a power switch to turn off the subwoofer, it will not harm the subwoofer or the monitors. Nowdays there is also remote controlled power sockets that you can control via remote controller, as example in picture below,b_white,f_auto,h_800,w_800/d_default.png/6435200173195.jpg

Best Regards,
Jani Oksanen
Customer Support Team