Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Switch on - Starting Level of SAM Monitors

christian-j, modified 4 Years ago.

Switch on - Starting Level of SAM Monitors

Youngling Posts: 0 Join Date: 5/16/19 Recent Posts


i use two 8330 with a 7350 SUB all in SAM network with AES input.

I switch the system on via a common fuse to not switch all speakers seperately on.

The systems seem to start with 0 dB reference level not reading the volume knob (with -120 db) - what is LOUD in my case.

Is there a possibillity to set the "start up level" to -120 or an other fixed value?

Thank you very much

jani-oksanen, modified 4 Years ago.

RE: Switch on - Starting Level of SAM Monitors

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi Christian,

I'm sorry for late reply. Yes this is possible, please download our latest GLM 3.1.1 from our website, and store the wanted volume settings to the monitors.


Best Regards,
Jani Oksanen
Customer Support Team