Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 1037C MF Diaphragm Teared off.

mayank, modified 3 Years ago.

Genelec 1037C MF Diaphragm Teared off.

Youngling Posts: 0 Join Date: 9/5/19 Recent Posts

Hello there,

I've a pair of Genelec 1037C Studio Monitors, as I can see the MF Diaphragm is teared off, So, Genelec service providers have sent me 2 options whether I can replace the whole driver that costing around 63k ₹ per unit, and 2nd option is to replacing just the diaphragm only that is costing around 38k ₹. So, what should I do?  Suggest me some options. 


Mayank here.

jani-oksanen, modified 3 Years ago.

RE: Genelec 1037C MF Diaphragm Teared off.

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi There,

Yes, these are the two options. I would recommend to replace only the diaphragm, as the end result will be the same, and you will save some money.

Best Regards,
Jani Oksanen
Customer Support Team