Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

7050C

yunie6, modified 3 Years ago.

7050C

Youngling Posts: 6 Join Date: 8/14/17 Recent Posts

Hi! Saw the new 7050C and just have a few questions

1. If 7050C is not switched on, but it is still connected to the studio monitors (OUT) and interface (IN), can the signal still go through so that I can still hear music coming out of my studio monitors?

2. 7050B used to send full signal to the monitors which requires partnering only with Genelec monitors as they have a frequency cutoff at 85hz (or is it 80). I read that 7050C now can filter signals such that only 85hz or 100hz and above signal will be sent to monitors? If so, this means I can partner it with any studio monitors right?

Appreciate your help on this!
 

yunie6, modified 3 Years ago.

RE: 7050C

Youngling Posts: 6 Join Date: 8/14/17 Recent Posts

hey anyone to help me on this?

jani-oksanen, modified 3 Years ago.

RE: 7050C

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hi There! I'm sorry for late reply.

1. If subwoofer is shutdown, then unfortunately the monitors connected to it will not play audio.

2. 7050C has bass management, so it will play frequencies below 85Hz and send the higher frequencies to the monitors. In that sense it can also be used with 3rd party monitors, but we always recommend to use Genelec monitors and subwoofers together.

For faster replies, I would kindly advise to reach us through our official forms from link below:

https://www.genelec.com/customer-service 

Best Regards,
Jani Oksanen
Customer Support Team