Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8320 Network Connectivity Use

rkilbashian0823, modified 3 Years ago.

8320 Network Connectivity Use

Youngling Posts: 4 Join Date: 10/11/19 Recent Posts

All - I just purchased a pair of 8320A monitors and see that I can create a network.  Are these used exclusively for the GLM option?

manutal, modified 3 Years ago.

RE: 8320 Network Connectivity Use

Jedi Knight Posts: 180 Join Date: 4/25/14 Recent Posts

Yes, the RJ45 outputs are for the GLM network so that calibrations can be done etc. I suggest to read the manual.