Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Two pair of monitors one 7050B

monitorman, modified 3 Years ago.

Two pair of monitors one 7050B

Youngling Posts: 0 Join Date: 1/20/20 Recent Posts

Hi,

Is it possible to use one 7050B (or any G 5.1 subs) with two pairs of active speakers? I mean 2x 2.1 system with one Genelec 7050B. Both pairs are not powered/used at same time.

Like this -> UAD Apollo X main monitor out > Pair of 1029A + UAD Apollo X line 3/4 out > Pair of Yamaha DBR12 + Using one 7050B subwoofer.

Using Front left + Front right for 1029A and Rear left + Rear right for Yamaha.