Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

1037 Overload "Red" and interferences questions.

balir, modified 2 Years ago.

1037 Overload "Red" and interferences questions.

Youngling Posts: 4 Join Date: 2/3/16 Recent Posts

Hello,

I have a wonderful pair of 1037b. Unfortunately, each time I turn them on, the "OVL" quickly turn red and a massive noise peak passes through the monitors (whether my gears in the studio are activated before or after the genelecs).
Are there any solutions to soft power the monitors smoothly and get rid of that annoying and stressful sound?

Also, do you have a solution to get rid of the rfi and emi frequencies on tweeters?

Thank you for your time and support. Blessings