Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 8030C Isopod screw type?

burrbrown, modified 3 Years ago.

Genelec 8030C Isopod screw type?

Youngling Posts: 2 Join Date: 5/28/20 Recent Posts

Hello, I have just purchased a new Genelec 8030C, manufactured (according to the serial number label) 2/2019. I am trying to move the isopod base from its default vertical mounting and change to a horizontal mounting. I am having trouble figuring out what type of tool is needed to loosen the screw, as it looks like some sort of hex key or torx screwdriver head is needed. I don't want to "strip" the screw head with an improper tool, so could someone please tell me the correct tool that is needed to loosen the isopod screw?

Thanks in advance!

(I've attached a picture of the screws)

Attachments:

burrbrown, modified 3 Years ago.

RE: Genelec 8030C Isopod screw type?

Youngling Posts: 2 Join Date: 5/28/20 Recent Posts

FYI, I ended up using a 7/64" hex key to remove the screws without issue.