Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

G5 and F2..?

1bitdac, modified 2 Years ago.

G5 and F2..?

Youngling Posts: 4 Join Date: 1/19/15 Recent Posts

Hi,

is it any idea to use G5 and few F2 subwoofers around the room together? The room is a big loft room.. almost 4 meters high and maybe 60m2.

If so how many F2 subwoofers? ..2,3,4..? Is it needed to loop the G5 signals through one F2 for filtering?

It is just for two channel stereo.

Thanks for comments..

f2 g5

Attachments:

antong, modified 2 Years ago.

RE: G5 and F2..?

Padawan Posts: 76 Join Date: 6/12/20 Recent Posts

Hello, 1bitdac!

Yes, you can use G5 and F2 together. 3-4 pcs of F2B will match a pair of G5 maximum SPL. If subwoofers are placed close to a wall or a corner and you dont usually play that loud, 2 pcs can be sufficient. 
You can wire signals thru one subwoofer to G5. Then link secondary subwoofers to the first one. This is explained in operating manual page 6:
https://www.genelec.fi/sites/default/files/media/f_two_2019_opman_0.pdf

Anton,
Factory service team