Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Simple dumb connectivity question

mdman, modified 3 Years ago.

Simple dumb connectivity question

Youngling Posts: 2 Join Date: 9/15/20 Recent Posts

I'll be demoing 8341 monitors. I have a Mac connected by. USB to RME babyface pro connected by optical cable to an optical/ AES EBU converter. How do I connect that single output (AES EBU lead) to the two 8341s? Thanks

radzmar, modified 3 Years ago.

RE: Simple dumb connectivity question

Youngling Posts: 19 Join Date: 6/25/20 Recent Posts

You connect the AES/EBU converter with the "Digital In" port of one speaker and the second speaker with the "Digital Thru".