Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM with non-SAM monitors

gr8fox, modified 3 Years ago.

GLM with non-SAM monitors

Youngling Posts: 2 Join Date: 9/25/20 Recent Posts

Hello!

What is the proper way to run GLM with a 7360A and M040? 

I ran it with the sub only, and it appears to have applied filters.  They sound great!  How do I apply phase correction?  If I use GLM, phase is done by software so I cannot use the DIM switches, correct?  I have played around with the phase and distance correction in the GLM software.  Do I do this by ear?  I have the phase and distance setting where the bass is the loudest and punchiest and tightest sounding, but is there a way for the GLM to do this with the M040?

Thanks much

lukester, modified 3 Years ago.

RE: GLM with non-SAM monitors

Jedi Master Posts: 296 Join Date: 4/22/10 Recent Posts

Yo,

phase correction doesn't work between analog and digital models.
Yes, do it by ear, sounds like you're on a good track.
​​​​​​​Maybe try playing 85Hz test tone and adjust phase then.
​​​​​​​Delay won't help, because the digital sub is already approx 80cm late ;)

gr8fox, modified 3 Years ago.

RE: GLM with non-SAM monitors

Youngling Posts: 2 Join Date: 9/25/20 Recent Posts

Thanks