Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

G3+F2 with Yamaha WXC50, volume control

daniel.granstrom, modified 2 Years ago.

G3+F2 with Yamaha WXC50, volume control

Youngling Posts: 1 Join Date: 4/2/20 Recent Posts

This is a question about volume control.

I have two G3 speakers connected to the F2 subwoofer with RCA-RCA cable. The F2 is then connected to the Yamaha WXC50 preamp with optical.

Ihave heard pros and cons about digital volume control and got some recommendations to let the F2 do all the volume control. How much quality will I loose if I do the volume control digitally on the WXC50. The reason I'd like to do this is it let's me control the audio directly from my phone.

Thanks for any comments.

g three volume control f two yamaha wxc50