Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Should 8331a Monitors show -8db roll off at 10khz?

imdrecordings, modified 2 Years ago.

Should 8331a Monitors show -8db roll off at 10khz?

Youngling Posts: 2 Join Date: 12/3/20 Recent Posts

Hi all.  I can’t tell if it’s a recent change or not,  but my Ones 8331As show a -8.5db roll off at 10k.  Is this normal or should it read closer to flat?  It’s the same on GLM 3 and 4.  I’m going analog in to a 7050 sub and out to the 8331As.  I’ve attached a screen shot of it.  Thanks for any help!

Attachments:

jani-oksanen, modified 2 Years ago.

RE: Should 8331a Monitors show -8db roll off at 10khz?

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello,

Please reach us at support@genelec.com for support. It may be due wrong type of measuring circumstances or fault on the microphone if both 8331As look the same.