Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

looking for 8" driver for 1031A

ceteris, modified 2 Years ago.

looking for 8" driver for 1031A

Youngling Posts: 2 Join Date: 12/17/11 Recent Posts

one of my 1031A's seems to have a blown driver. as least I think it's blown:  it's intermittent, and sometimes when I tap on the cone it will come back to life. does anybody know how I can get a replacement driver? thanks

antong, modified 2 Years ago.

RE: looking for 8" driver for 1031A

Padawan Posts: 76 Join Date: 6/12/20 Recent Posts

Hi, @ceteris !

We have those drivers available. Please, contact your local authorised technical service for repair. You can find your closest one here: https://www.genelec.com/product-service

You can also contact us at service@genelec.com for more help.

Anton,
Factory service team