Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Multiple monitors w Sub

mrredroomstudios, modified 2 Years ago.

Multiple monitors w Sub

Youngling Posts: 2 Join Date: 2/24/21 Recent Posts

Hi 

 

I am setting up a new studio and I am a bit confused regarding the GML system.

I am aiming to use 8330s w 7350 Sub with a set of mixcubes as secondary setup.

It might even end up a pair of ATC25s in the end.

I will probably use Antelope Satori as monitor/hearback unit.

My aim is to use the sub out on the satori to be able to have the possibility to use the 7350 with the other monitors to.

The question is if that’s possible with the Genelec Top+Sub GML alignment in place?

Is it enough to just store the calibration in each separate speaker?

 

best

 

//m

mrredroomstudios, modified 2 Years ago.

RE: Multiple monitors w Sub

Youngling Posts: 2 Join Date: 2/24/21 Recent Posts

Ping.