Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

fomo, modified 1 Year ago.

GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Youngling Posts: 7 Join Date: 3/1/21 Recent Posts

When using SAM speakers for home theater, if I have 2x 8350A as my L/R and one 8351B as my Center channel, all 3 can be connected to a single 7370A subwoofer and with GLM can be treated as "full range" speakers correct? So then I can tell my processor to send the L/C/R signal with no low frequency cut-off to the 7370A because GLM would have already determined all the necessary crossover points between the 7370A and 8350A. Just making sure this is feasible.

lukester, modified 1 Year ago.

RE: GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Jedi Master Posts: 296 Join Date: 4/22/10 Recent Posts

yes.
from your post I take it you're using analog only.
crossover frequency is a fixed 85Hz in this case.

janne-koo, modified 1 Year ago.

RE: GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Padawan Posts: 73 Join Date: 10/26/15 Recent Posts

I don't think that's right. Distributed bass management works also with analog inputs, so keep the GLM network in play and cross over anywhere you like.

lukester, modified 1 Year ago.

RE: GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Jedi Master Posts: 296 Join Date: 4/22/10 Recent Posts

hmm, I think what you say is correct for a 7350, which only has distributed bass management.
7360 and above still have regular bass management, adjusting the filter of the analog x-over inside them would be hard afaik.
Instead of bringing our theories any of us three could run a test, but let me be the first to admit that I'm too lazy today.

fomo, modified 1 Year ago.

RE: GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Youngling Posts: 7 Join Date: 3/1/21 Recent Posts

Thanks all for chiming in! To answer lukester, Yes, analog signals t from the Trinnov Altitude 16 but I can choose to have Trinnov handle bass management like any processor would or let the GLM handle it and allow the Altitude 16 to send the L/C/R as full range signals to the 7370A. I guess I'm assuming that GLM would do a better job of deciding how much bass the 8350A/8351B can handle in the context of my room response.

alexsunny123, modified 1 Year ago.

RE: GLM + 7370A + 2x 8350A + 8351B for full range L/C/R?

Youngling Posts: 1 Join Date: 7/6/21 Recent Posts

thanks for the awessome information.

https://ometv.onl https://chatroulette.top https://omegle.wtf https://bazoocam.cam