Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

1030A Voltage and Fuse Question

snad, modified 2 Years ago.

1030A Voltage and Fuse Question

Youngling Posts: 2 Join Date: 8/18/13 Recent Posts



I am preparing to move back to the US and currently have a pair of 1030A's here in Germany. The fuse is a T500mA / 250v. If I return to the US do I need to switch to a T1A / 250v fuse before changing the mains voltage selector or should it not matter / will it work with the current T500mA/250v fuse on 110 mode? My version of the 1030 has access to the mains fuse.