Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 8341A

sigourneyanderson, modified 8 Months ago.

Genelec 8341A

Youngling Posts: 0 Join Date: 9/3/21 Recent Posts

Hello everyone,

I bought a pair of second hand Genelec 8341A from one guy,and them has some weird problem.

When I connect then with AES input,it will suddenly lost sound for some seconds during playing music.

I tried with a pair of Dante AVIO AES3 adapter and a cheap no-brand XMOS USB interface.

When use AVIO and connect them saprately (without using the AES out port on the speaker),

The problem will come out when sample rate are higher than 48khz.

I have a nuprime dac-9 for analog input, and it dosen't has problem on any AES singal input mentioned above (AVIO/USB interface,any sample rate).

Did anyone encounter similar problem before?

lukester, modified 8 Months ago.

RE: Genelec 8341A

Jedi Master Posts: 296 Join Date: 4/22/10 Recent Posts

hmm, are you using AES cables or normal analog XLR cables?
On short runs, it's usually okay to use analog cables, for longer runs, you should get dedicated AES cables.

jani-oksanen, modified 8 Months ago.

RE: Genelec 8341A

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello,

Please reach out to us at service@genelec.com and let us know serial numbers of your products as well.

Best regards,
Jani Oksanen
Customer Support team