Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Correct settings for "Sparta Binauralizer" using "Aural ID"

a.zhendi, modified 11 Months ago.

Correct settings for "Sparta Binauralizer" using "Aural ID"

Youngling Posts: 2 Join Date: 8/2/21 Recent Posts

Hello.

I am using Aural ID for multichannel monitoring via Sparta Binauralizer.

In most recent version of the plugin there are two modes for the "Interp. Mode" option.

See attached screenshot for description.

Can someone clarify it for me plz what mode should I use to get most accurate result from my Aural Id?

Given the input 5.1 source I am currently working with, these interpolation options   produce very obvious difference in binauralized output.

I don't know which mode should I trust more.

I am asking this here because this plugin used in Aural Id manual as an example.

jani-oksanen, modified 10 Months ago.

RE: Correct settings for "Sparta Binauralizer" using "Aural ID"

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello,

We have been using and testing “Triangular” setting and not had any problems. So we can say that we know that Aural ID works in “Triangular” mode and that it is worth contacting the developer of the plugin regarding the differences between the two modes if required.


Best regards,
Jani Oksanen
Customer Support team

a.zhendi, modified 10 Months ago.

RE: Correct settings for "Sparta Binauralizer" using "Aural ID"

Youngling Posts: 2 Join Date: 8/2/21 Recent Posts

Thanks for reply! After some comparison of the binaural monitoring with monitoring in real multi-channel environment I can confirm that with the 'Triangular' mode my aural id sounds much more comparable to real space.