Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Looping analog audio in 8330A

mazhar, modified 5 Years ago.

Looping analog audio in 8330A

Youngling Posts: 20 Join Date: 2/11/14 Recent Posts
Hi,

Just wanted to understand if I wanted to loop my rear and surround 8330 speaker, running analog audio, during one paritcular mix so that it plays as a single surround source (say looping all the left channels together and same for the right channels), how can I go about connecting them?

Also, if I wanted to switch them to discrete sources (say 7.1) for another mix, is it possible to do it from the GLM without rewiring it?

I do not intend to use AES/EBU signal

Please let me know
Thanks,
Mazhar
ilkka-rissanen, modified 5 Years ago.

Re: Looping analog audio in 8330A

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

GLM can't control that, you would need to use your DAW or what ever device you use as your source to direct same channel to multiple outputs.