Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Z8050-408 & K&M 26790

staccato, modified 4 Years ago.

Z8050-408 & K&M 26790

Youngling Posts: 15 Join Date: 8/19/15 Recent Posts
Is it possible to screwed Genelec Z8050-408 with the old K&M 26790 Design Monitorstativ:

https://www.amazon.de/gp/product/B0016Z ... 1IGQM7CHE4
klaus, modified 4 Years ago.

Re: Z8050-408 & K&M 26790

Youngling Posts: 10 Join Date: 4/2/10 Recent Posts
Hello,

yes,it´s possible to screw the Genelec stand plate 8051-408 (K&M 19625-330-55) with the K&M 26790.

The stands are discontinued:
26790-080-56 - height 800mm
26790-065-56 - height 650mm
26790-050-56 - height 500mm

The old version of the stand plate (Genelec 8050-408 / K&M 19625-329-55) isn´t compatible!

Klaus