Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

M040 proper setup

roderick, modified 5 Years ago.

M040 proper setup

Youngling Posts: 2 Join Date: 12/19/16 Recent Posts
I have one speaker in a corner (unavoidable in my case) with the bass level at -4 dB and with the bass eq on as suggested. The other speaker is close to the wall with the bass level at -2 dB as suggested. My question is, is it normal to have the monitors at different settings like this? Is this recommended?
ilkka-rissanen, modified 5 Years ago.

Re: M040 proper setup

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts

Yes it is both normal and recommended, that is exactly why you have individual settings on each monitor. :)