Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

7060 Noise

folivier-12, modified 6 Years ago.

7060 Noise

Youngling Posts: 3 Join Date: 7/7/11 Recent Posts
Hi, this is my first post in this forum.
I recently bought a 7060 used sub and it arrived today. When I tested it , it started to make a very loud 125/250 hz square wave. I've tested it with a ground lift and no change. I've opened it to make sure that every was clean and no cables were stripped or anything else. Does anyone know what could be the problem?
Here is a video link that i've uploaded: https://www.youtube.com/watch?v=wwSz2_j7WRg

Thank you!
ilkka-rissanen, modified 6 Years ago.

Re: 7060 Noise

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Have you checked that the voltage selector switch (red switch on the left side of the mains connector) is set according to the mains voltage in your area? A wrong setting might explain the noise that you are hearing.
folivier-12, modified 6 Years ago.

Re: 7060 Noise

Youngling Posts: 3 Join Date: 7/7/11 Recent Posts
Yes it is! Unless if the voltage switch is broken :?
ilkka-rissanen, modified 6 Years ago.

Re: 7060 Noise

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Ok, then it is recommended that you contact your local Genelec distributor and their service department: http://www.genelec.com/where-buy
folivier-12, modified 6 Years ago.

Re: 7060 Noise

Youngling Posts: 3 Join Date: 7/7/11 Recent Posts
Ok Thanks! I tried with a 110v to 220v tranformer the voltage selector switch and it's not the problem. I will contact my local distributor.

Thank you