Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Noob Question - how to adjust frequency DIP switches - 8010A

whatsgoingon, modified 5 Years ago.

Noob Question - how to adjust frequency DIP switches - 8010A

Youngling Posts: 3 Join Date: 2/13/16 Recent Posts
Hi all

I recently bought the 8010A monitor however due to the fact that the DIP switches are recessed it means that I cannot access them. How do I adjust them?

Thanks in advance.

-WhatsGoingOn
whatsgoingon, modified 5 Years ago.

Re: Noob Question - how to adjust frequency DIP switches - 8

Youngling Posts: 3 Join Date: 2/13/16 Recent Posts
bump
ilkka-rissanen, modified 5 Years ago.

Re: Noob Question - how to adjust frequency DIP switches - 8

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

You can use for example a small flat head screwdriver.

http://www.homedepot.com/p/Klein-Tools- ... /100647690
whatsgoingon, modified 5 Years ago.

Re: Noob Question - how to adjust frequency DIP switches - 8

Youngling Posts: 3 Join Date: 2/13/16 Recent Posts
Hello,

You can use for example a small flat head screwdriver.

http://www.homedepot.com/p/Klein-Tools- ... /100647690



Great, thanks. They sound so much better now in my confined space. Next step is to get the table stands!