Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8250a dsp crossover

hypersync, modified 6 Years ago.

8250a dsp crossover

Youngling Posts: 3 Join Date: 12/23/15 Recent Posts
Is the dsp crossover on the 8250 phase aligned for both woofer and tweeter?
ilkka-rissanen, modified 6 Years ago.

Re: 8250a dsp crossover

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Can you clarify what you mean by "phase aligned"? If you mean that the phase angles and delays are matched at the crossover, the answer is yes, of course.
hypersync, modified 6 Years ago.

Re: 8250a dsp crossover

Youngling Posts: 3 Join Date: 12/23/15 Recent Posts
Yes,that is exactly what I meant,as with the dynaudio bm15a.

Some manufacturers simply use dsp crossovers, but not apply time correction which creates untrue response and imaging around the crossover frequency.

Thanks for the confirmation.