Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8240A ISSUE

snvi1990, modified 6 Years ago.

8240A ISSUE

Youngling Posts: 2 Join Date: 12/3/15 Recent Posts
Hello, I am new here, hoping someone can help me, I bought a new pair of g8240, and now I have the problem that suddenly one of my speakers drops at very low volume, I have read everything from manual and all of the information, there is a fix for this?, Thanks
ilkka-rissanen, modified 6 Years ago.

Re: 8240A ISSUE

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

That does not sound like normal operation. Do you have any other information about the system? Are you using analogue or digital input?
snvi1990, modified 6 Years ago.

Re: 8240A ISSUE

Youngling Posts: 2 Join Date: 12/3/15 Recent Posts
Hello, thanks for your answer, I am using analog input, however now one monitor have a very low volume I dont know what to do, all the setting in the back og the speaker are set by the default and are the same for both
ilkka-rissanen, modified 6 Years ago.

Re: 8240A ISSUE

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Are you using the GLM to control the speakers? Where are you located?